Enjoy Our Maiden Flight Video!!  --Parts From AddictiveRC!!

Maiden Flight--Read Description in video!

Testing for "Jello" in the resulting video with my GoPro Hero 2 camera directly mounted (no gimbal) on my DJI Flamewheel F450 Naza-M GPS QuadCopter after balancing my Xoar 9x5 beechwood props very carefully, mounted on my new Tiger Motor MT2216 11 900Kv Motors (from John at AddictiveRC).

My GoPro Hero 2 camera was set at 11MP, maximum wide angle, 1080P and 30 frames per second. The video WAS NOT…

Voltage Settings Setup For Naza:



1. Fully charge battery

2. Open Naza assistant

3. Click on "Voltage" tab

4.. Turn on Naza voltage monitor (it's probably on already)

5. Calibrate fully charged battery and note the voltage of the battery

6. Set the First Level No Load protection at fully charged battery voltage Minus 1.2 volts (4s) AND SET THE LOSS TO 0 (ZERO) (make sure that the second level protection…

Is there anyone near Santa Fe, NM who can teach me the ropes? I would like to learn to custom build my own quad kit with cameras. I really love Dale Kobetich's work!

check out my new lighting setup on my y6

Hello All,

I'm from Brazil and a just start few months ago.

My first 6Ch RC is a Guanli GL-EP450-1.

Unfortunelly I damaged the main gear of this Heli and now I'm getting problems to get this part (PN 450-1-11 ). It's a 132T gear.

Any help is appreciated!

Thanks in advanced!

Here are some new Photos of the Bja Build.

It is coming along well. Next will be a 2-Speed Transmission By Bja Skunkworks. Its a Work of Art.

Also a Billet Transmission case from Turtle racing. And a New Elcon Teflon Clutch.

The new 30.5cc motor will be going in soon!…

We are now Accepting Pre-Orders For the New Teeny Tiny Walkera V-Series V100D01 FP RTF.

Order yours Now!

Here is a Link to the Product page:…

Im haveing trouble with my balance charger and harness. Look at the pic and tell me if you can help. I get the error message - Battery Vol ERR Cell Connect when trying to charge my MD530 battery.

The Pic -

It appears to me that the Main battery leads are connected to the output banna socket leads with opposite…

thank you, well, I'm a beginner but my friend who turned me onto this is an amazing rc pilot. He actually served in V.N. war as a chopper pilot. He's giving me lessons and having a blast but also frustrated as you may have experienced.

I'll upload some of the ART as you will flip out and laugh....

OK back to work, plan to fly tonight ( IF IT DOESN'T RAIN....

keep in touch!

Hi Guys,

Just thought I'd post about a new Product Only Available at RcHobbyHelicopter.com On Monday May 3rd.

It's the Worlds first Flybarless Rotor Head for the Walkera 4G6 and 4G6S Helicopters.

This coupled with Walkera's New 3-Axis Gyro give you the worlds first Flybarless sub Micro CP Helicopter!

4/29/10

The first production run of the new CNC flybarless 4G6 heads have been completed and are ready to be shipped out to RcHobbyHelicopter. They are…

I had a chance to install a New Spartan Quark in the Custom Built HBK III today and All I can say is Wow!

The Tail is rock solid now. This little Gyro works great with the inexpensive Align DS420 Tail Servo.

I am impressed!

Here are some Photos of this Tiny Gyro.

Cheers, JohnW.…

This is a great Photo of how to set up your Gyro with a VP Tail.

Cheers, JohnW.

I received my new Walkera 4#6 last Saturday and I can't get it up...pun intended.

I know this bird can fly...maybe just not with me at the sticks.

Here's the torrid history:

Unpacked the heli and began pre-flight checks

1) All the servo…

Well Today I managed to finish the AddictiveRC Custom Built Align T-rex 250.

My final decision on the most powerful motor goes to............ The Scorpion 3900kv BL Motor!

It beat out the Gaui H255 3400kv in Punchout Testing today.

Also the best gyro goes to........ The Spartan Quark w/Metal Case.

So the final Build has the Following Componants:

Align DS410 Cyclic Seros

Gaui 095 High Speed MG Tail…

Hey Everyone,

Today I had a Chance to do some more testing to find the Ultimate set up and Electronics for the Align T-rex 250.

I have been fighting some small gremlins with the 250 Build.

Mainly Gyro issues. I am a Perfectionist and want my 250 to fly Just like the Perfect Gaui 255.

I found most of my gyro wag Issues have been…

Hey Guys,

I am Getting a real kick out of flying my new Align T-Rex 250 in front of my house now.

So as usual it's time for me to tinker with my new Heli.

I am very picky about Tail Holding properties and the stock set-up just wasn't perfect for me.

So I first started with a new Fresh Kevlar Tail Belt for Durability.

Next was time to change the stock Tail Servo.

So i tried the New Gaui 095 Metal Gear…