Here are some new Photos of the Bja Build.
It is coming along well. Next will be a 2-Speed Transmission By Bja Skunkworks. Its a Work of Art.
Also a Billet Transmission case from Turtle racing. And a New Elcon Teflon Clutch.
The new 30.5cc motor will be going in soon!…
We are now Accepting Pre-Orders For the New Teeny Tiny Walkera V-Series V100D01 FP RTF.
Order yours Now!
Here is a Link to the Product page:…Continue
Just thought I'd post about a new Product Only Available at RcHobbyHelicopter.com On Monday May 3rd.
It's the Worlds first Flybarless Rotor Head for the Walkera 4G6 and 4G6S Helicopters.
This coupled with Walkera's New 3-Axis Gyro give you the worlds first Flybarless sub Micro CP Helicopter!
The first production run of the new CNC flybarless 4G6 heads have been completed and are ready to be shipped out to RcHobbyHelicopter. They are…Continue
Added by AddictiveRC on April 30, 2010 at 10:29pm — No Comments
I had a chance to install a New Spartan Quark in the Custom Built HBK III today and All I can say is Wow!
The Tail is rock solid now. This little Gyro works great with the inexpensive Align DS420 Tail Servo.
I am impressed!
Here are some Photos of this Tiny Gyro.
Added by AddictiveRC on April 17, 2010 at 8:11pm — No Comments
This is a great Photo of how to set up your Gyro with a VP Tail.
Added by AddictiveRC on April 17, 2010 at 7:39pm — No Comments
Well Today I managed to finish the AddictiveRC Custom Built Align T-rex 250.
My final decision on the most powerful motor goes to............ The Scorpion 3900kv BL Motor!
It beat out the Gaui H255 3400kv in Punchout Testing today.
Also the best gyro goes to........ The Spartan Quark w/Metal Case.
So the final Build has the Following Componants:
Align DS410 Cyclic Seros
Gaui 095 High Speed MG Tail…Continue
Today I had a Chance to do some more testing to find the Ultimate set up and Electronics for the Align T-rex 250.
I have been fighting some small gremlins with the 250 Build.
Mainly Gyro issues. I am a Perfectionist and want my 250 to fly Just like the Perfect Gaui 255.
I found most of my gyro wag Issues have been…Continue
Added by AddictiveRC on March 20, 2010 at 9:03pm — No Comments
I am Getting a real kick out of flying my new Align T-Rex 250 in front of my house now.
So as usual it's time for me to tinker with my new Heli.
I am very picky about Tail Holding properties and the stock set-up just wasn't perfect for me.
So I first started with a new Fresh Kevlar Tail Belt for Durability.
Next was time to change the stock Tail Servo.
So i tried the New Gaui 095 Metal Gear…Continue
Hey Everyone I just installed these really nice Products we just got in From Custom RC Heli Styles.
CF 4G6 Tail Rotor Blades and Tail Struts and Canopy rod.
They look sweet and perform very nicely. And they were Perfectly balanced right out of the Box.
See photos below.…
Added by AddictiveRC on March 7, 2010 at 12:00am — No Comments
Well We just finished up the first of many Gaui Hurricane EP-255 Builds.
I was truely shocked with the Performance and Quality of this heli.
It has Quickly become my Favorite Heli to fly now!!
It is Super Stable in a hover (Flies like a Big 450 in my opinion).
I have never flown anything like this Heli.
And at idle-up and a headspeed of 4,000RPM it's power is quite impressive.
This one has the following:
Hitec 65MG Cyclic servos
We are Proud to Announce we will have Gaui Hurricane EP-255 In Stock at RC Hobby Helicopter!
Over all Lenght: 488mm
Main Rotor Diameter: 550mm
Tail Rotor Diameter: 110mm
Motor: 34ooKV Brushless
Weight All-Up: 360g to 380g
Main Rotor Baldes: 250mm
6 min Flight time with 11.1V/900mah Li-Po Battery.
I Want One! ;-)…
Hey Guys I have been looking at this one For awhile now and Finally it's Full 1920x1080P Resolution @30fps!
Nice and Compact as well. It should fit in my RCHH 300 Heli and my Innovator EXP as Well.
It Runs for $329.99 and we are looking into Carrying them once I test mine.
See Specs Below.
I had a chance last night and Sunday Afternoon to do some more Motor Testing with my RCHH 300 Helicopter.
Results are getting more impressive now.
I installed a 320 Watt 450 size motor with Rhino Gear 13T Pinion and Wow!!
Big collective pop now.
This is the Performance I was Searching for!
Below are some photos of the installation.
I am using an older Align t-rex 450 ESC for the Moment.
I will be trying more combos of motors and ESC's…Continue